There are 16 products.
Original Xhorse V2.0.6 VVDI MB BGA Tool:
1. Support BE key, read password and prepare new key via IR.
2. NEC V051,V057 support on board get password
3. All NEC keys support on board write and erase
4. Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
Original Xhorse V2.0.6 VVDI MB BGA TooL:
1. Support BE key, read password and prepare new key via IR.
2. NEC V051,V057 support on board get password
3. All NEC keys support on board write and erase
4. Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
Original Xhorse V2.0.6 VVDI MB BGA TooL:
1. Support BE key, read password and prepare new key via IR.
2. NEC V051,V057 support on board get password
3. All NEC keys support on board write and erase
4. Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
5. Support renew EIS and ELV
Original Xhorse V2.1.7 VVDI MB BGA TooL:
1. Support BE key, read password and prepare new key via IR.
2. NEC V051,V057 support on board get password
3. All NEC keys support on board write and erase
4. Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
5. Support renew EIS and ELV
Original Xhorse VVDI2 V1.1.1 Commander Key Programmer:
1. This VVDI2 Full Package Contains AUDI Generation 5, BMW OBD Fucntion and BMW CAS4+ Functions Already, No Need Other Authorization
2. VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, BMW Multi Tool, CAS Plus for BMW Multi Tool, CAS4 Plus for BMW Multi Tool
3. Support VW, Audi, BMW AND Porsche
4. Update Online Free Lifetime
Xhorse Remote Tester Radio Drequency(RF) Infrared(IR)
Frequency Test Range:
1.300Mhz-320hz
2.434Mhz
3.868Mhz
NEC24C64 update module can be used with Micronas OBD TOOL (CDC32XX) V1.3.1 and VAG KM + IMMO TOOL. By update with NEC24C64Update
Module, you can get authorization for NEC24C64 chip. Then you can use it on your Micronas OBD TOOL (CDC32XX) V1.3.1 cable or VAG KM+IMMO
Tool to do NEC24C64 type dashboard.
Original Xhorse Condor XC-002 Ikeycutter Mechanical Features:
Aluminum Die-casting chassis
Precision Machining
Renishaw line detection system
Column Cross guide rail
AUDI J518 Test Line Work:
1.Work together with VVDI / VVDI MB tool
2. Can do immobilizer online & component protection.
3. Can be used to connect J518 engine, gateway and instrument ignition switch
Original Xhorse VVDI PROG Programmer VV4.7.4:
Latest Software Version: V4.7.4
Firmware Version: V1.2.2
iKeycutter CONDOR XC-MINI :
1. Built-in Database
2. Support Multi-languages: Portuguese/Spanish/French/Germany/Russian/Czech/Arabic/Turkish/Dutch/Polish/Bulgarian/Norway/Slovakia/Italian/English/Chinese
3. Update Online Lifetime
4. 3-Axis Precision Ball Screw Transmission
5. Cross Rail
6. All Aluminum Machine Body
7. Single machine with both Tracer/Cutter
8. Standardly include three clamps M1/M2/M3
9. Support Sided/Track/Dimple/Tibbe keys
